CAD & Mesh-Tools
CAD and meshing software installed on viz, amp and green cluster nodes.
FreeCAD
FreeCAD is an easy to use open-source CAD software, that can use Gmsh or Netgen for meshing. It can also serve as a frontend for CalculiX and ElmerFEM, thus providing similar functionality as SolidWorks.
module load rocky8
module load freecad
freecad
(Please don’t run simulations on viz) FreeCAD is best used within a VNC session.
How to cite:
FreeCAD available from: https://www.freecadweb.org.
Salome
Salome is a multi-platform environment, allowing the realization of physics simulations. Salome is suitable for various stages of a study: from creation of the CAD model and the mesh to the post-processing and visualization of the results. Other functionalities such as uncertainty treatment, data assimilation are also implemented. Salome does not contain a physics solver but it provides the computing environment necessary for their integration.
module load rocky8
module load salome/9.13.0
Salome has a python interface, so the meshing can be done as a batch-job on the cluster nodes.
The current state can be dumped into a script from the GUI by CTRL+D, the script can then be executed on the command-line by:
salome -t scriptname.py
It is therefore possible to prepare the geometry on your workstation or an OnDemand desktop session, dump the script, add the meshing command and run the script on the cluster in batch-mode.
See separate page on visualization.
How to cite:
Salome can be cited as DOI:10.13140/RG.2.2.12107.08485.
BRL-CAD
BRL-CAD is a CAD software that has been in development since 1979 and is open-source since 2004. It is based on CSG modeling. BRL-CAD does not provide volume meshing, however, the CSG geometry can be exported to BREP (boundary representation, like STL, OBJ, STEP, IGES, PLY), the g-* tols are for this, while the *-g tools are for importing. An introduction can be found in this PDF.
Gmsh
Gmsh meshes can be used with ElmerFEM and OpenFOAM. For OpenFOAM, make sure it is saved as version 2 and ASCII format.
The GUI can be used within a OnDemand desktop session, large meshes can be done as batch jobs on cluster nodes (use srun or sbatch), on the command-line run:
gmsh -3 -format msh2 -o outfilename.msh infilename.geo
this creates a volume mesh and saves as version 2 format suitable for OpenFOAM.
Use the SPACK module:
module load rocky8-spack
module load gmsh
How to cite:
If you use Gmsh please cite C. Geuzaine and J.-F. Remacle. Gmsh: a three-dimensional finite element mesh generator with built-in pre- and post-processing facilities. Int. J. Numer. Methods Eng., 79(11), pp. 1309-1331, 2009. You can also cite additional references for specific features and algorithms.
Netgen (NGsolve)
Netgen is a part of the NGsolve suite. Netgen is a automatic 3d tetrahedral mesh generator containing modules for mesh optimization and hierarchical mesh refinement. It accepts input from constructive solid geometry .csg or boundary representation (BRep) from .stl files, but also handles .brep, .step and .iges formats. Those meshes generated can be exported in several formats (e.g. neutral, Abaqus, Fluent, ElmerFEM Gmsh and OpenFOAM). Netgen has a GUI (e.g. use a X2GO session on viz), but can also be used through its Python interface.
A Python example using the OpenCASCADE kernel:
from netgen.NgOCC import *
geo = LoadOCCGeometry('screw.step')
geo.Heal()
mesh = geo.GenerateMesh()
# mesh.Save('screw.vol')
mesh.Export("export.msh","Gmsh Format")
from ngsolve import *
Draw(Mesh(mesh))
A Python example using the netgen STL:
import netgen.stl as stl
geo2 = stl.LoadSTLGeometry("input.stl")
m2 = geo2.GenerateMesh (maxh=0.05)
m2.Export("export.msh","Gmsh2 Format")
You can get a list of export formats from the GUI.
How to cite:
Netgen/NGSolve is open source and available at www.ngsolve.org.